SCADABatch process
Pan Batch SCADA
Problem: six process pans were run from separate panels, with batch records on paper. When a quality issue came up, nobody could say what happened during that batch.
What we did: connected two S7-300 and one S7-1200 PLC to a single SCADA system, gave every batch a number, and logged temperature, vacuum, steam and timings to SQL Server.
Result: any batch can now be traced back to its full history in seconds, and supervisors see all six pans on one screen.
- PLCs
- 2 × S7-300, 1 × S7-1200
- Units
- 6 pans
- Logging
- SQL Server, per batch
MonitoringPlant-wide
Multi-PLC Dashboard
Problem: about fifty PLCs from Siemens and Allen-Bradley, each with its own local screen, and no single view of the plant.
What we did: built a Python application that reads both vendors' PLCs over the network, shows status and alarms on one screen and logs data continuously.
Result: one monitoring screen for the whole plant without buying two SCADA licences.
- PLCs
- ~50, Siemens + A-B
- Stack
- Python GUI
- Data
- Continuous logging
SafetyLifting
Mobile Crane LMI
Problem: a mobile crane with no reliable way to know when a lift was close to its limit at a given boom angle.
What we did: designed a load moment indicator that measures boom angle and load, looks up the crane's load chart, and warns then cuts off before the limit.
Result: operators see their margin on every lift, and the safety cut-outs are protected against tampering.
- Inputs
- Boom angle, load
- Logic
- Load chart lookup
- Output
- Warning + cut-off