Level & radar instruments
Need a radar level transmitter in Pakistan? We supply radar level transmitters, level switches and field instruments in Pakistan, including Endress+Hauser on request, and we install, wire and loop-check them into your PLC or SCADA, so the reading on the screen matches the tank.
Radar level transmitters
Radar is the most reliable way to measure level in most tanks, silos and vessels because it does not touch the product and ignores vapour, dust, pressure and temperature. We supply and install:
- Non-contact radar for liquids in storage tanks, day tanks and sumps, and for bulk solids in silos and hoppers.
- Guided wave radar for narrow vessels, foam, and interface measurement between two liquids.
- Tank gauging with readings sent to SCADA for stock control in depots and terminals.
Level switches
As a level switch supplier in Pakistan, we know point-level switches are what stop pumps running dry and tanks overflowing. They are often the last line of protection, so we choose the type for the product and the duty:
- Vibrating fork level switch — liquids and many powders, high and low level alarms.
- Float switches — clean water tanks, sumps and pump control.
- Capacitive and conductive — sticky, conductive or bulk products.
- Independent high-high switches — overfill protection on fuel and chemical tanks.
Field instruments
- Pressure and differential pressure transmitters and gauges.
- RTDs, thermocouples and temperature transmitters.
- Electromagnetic, vortex and ultrasonic flow meters.
- Solenoid and actuated valves.
Installation and integration
We mount each instrument where it will read correctly, wire it with shielded instrument cable, configure ranges and HART settings, and check the loop from the field device to the PLC and the SCADA screen. Every instrument is tagged and listed in the instrument index, and can be calibrated and certified before start-up.
FAQ
Straight answers to what plant owners and engineers ask us most.
What is the difference between a level switch and a level transmitter?
A level switch gives an on/off signal at one point, for example high level or dry run. A level transmitter, such as a radar, measures the level continuously and sends a 4–20 mA or HART signal to the PLC or SCADA.
When should I use non-contact radar or guided-wave radar?
Non-contact radar suits most tanks and silos and is not affected by vapour, pressure or temperature. Guided-wave radar works well in narrow vessels, with foam, or for interface level between two liquids.
Which level switch is best for my tank or silo?
Vibrating fork switches suit most liquids and many powders, float switches suit clean water tanks and sumps, and capacitive or conductive switches suit sticky or conductive products. We choose by product, temperature and pressure.
Do you supply Endress+Hauser instruments?
Yes, we supply Endress+Hauser and other leading instrument brands on request, and install, wire and configure them into your PLC or SCADA system.
Can you connect the instruments to our SCADA?
Yes. We wire the instruments with shielded cable, configure ranges and HART settings, check every loop from the field to the screen, and add the readings and alarms to your SCADA.
Machine down or planning an upgrade?
Send us the PLC model and the problem. We reply within one working day.
